炼油污水回用处理RO系统的稳定运行及维护

文章介绍了兰州石化公司炼油污水深度处理反渗透(RO)系统的工艺流程及维护。通过进出水电导率、产水回收率等变化情况,分析了RO系统的运行状况。得知:运用此系统,反渗透系统产水回收率达到65%～70%,系统脱盐率在99%以上,产水可以满足一级除盐水要求,实现了装置稳定运行的目标。     

络合萃取技术分离制药废水中的金刚烷胺

以P204为络合剂萃取水溶液中的金刚烷胺,研究了正辛醇和煤油2种稀释剂对萃取效果的影响,分析了萃取过程的络合机理和热力学过程,并考察了该萃取体系对实际制药废水中金刚烷胺的萃取效果。结果表明,采用P204/正辛醇=3∶2的复配萃取剂,在初始pH为8.0,在油/水相比为1∶1的条件下,金刚烷胺的萃取效率可以达到99.8%以上;以2.0mol/L的HCl溶液为反萃取剂,可以将51.1%的负载金刚烷胺反萃回收;红外光谱分析表明,P204对金刚烷胺的萃取遵循离子交换和离子缔合成盐机制;萃取过程为放热过程,低温条件下有利于萃取反应的进行;P204/正辛醇复配萃取剂对实际制药废水中的金刚烷胺也具有很高的萃取效率。     

微波修复原油污染土壤的均匀设计实验

采用均匀设计实验方法,研究了微波修复原油污染土壤时原油去除率与微波能耗、含水率和含炭率等因素的关系,并应用MATLAB编程拟合出经验公式。结果分析表明:微波能耗在0～288 kJ范围内,污染土壤的原油去除率随微波能耗线性增加;在含水率为6%、含炭率为4%、微波能耗从0增加到288 kJ时,原油去除率从0%增加至92.3%;含炭率在0%～4%范围内原油去除率与含炭率成线性关系,在微波能耗为288 kJ、含水率为6%、含炭率从0%增加到4%时,原油去除率从12.3%增加至92.3%;原油去除率与含水率成二次曲线关系且开口向下,微波修复原油污染土壤的最佳含水率为6.6%。研究结果对微波修复原油污染土壤技术的优化提供了有价值的参考。     

基于GCM_CB模型的土壤重金属污染评价

灰色聚类法已经运用于土壤重金属污染评价中,然而此法在确定聚类权重时仅考虑重金属浓度,忽略了衡量重金属毒性强弱的重要指标生物毒性指数。为了更客观和准确地反映土壤重金属的污染程度,将生物毒性指数引入到聚类指标权重中,构建GCM_CB(grey clustering method_concentration and biotoxicity)土壤重金属污染评价模型。通过对华东某地区的10个区域土壤重金属污染进行分析评价,并与常用评价方法对比研究,表明:其多数样点的评价结果基本一致,但针对样品4和样品9中的元素Hg,因其强毒性,使得评价等级由I级定为II级,从而提高了评价方法的灵敏度,更加符合该区域的实际土壤污染情况。     

几种试剂对硝酸根光催化脱色甲基橙的影响

以NO^-₃为光催化剂，在紫外灯照射下，对甲基橙溶液进行光催化脱色。结果表明，叔丁醇、甲醇和乙醇对催化脱色反应有抑制作用; KBr和Na₂SO₄对脱色反应均有促进作用;而且KBr的加入量存在最佳值; Na₂SO₄的促进作用随Na₂SO₄的量的增加逐渐增强。Na₂CO₃的存在对甲基橙的脱色反应没有影响。K₂S₃O₈和NO^-₃之间存在较强的协同作用；KIO₃和NO^-₃之间存在相加作用；KBrO₃和NO^-₃之间存在拮抗作用。     

伞罩型湿式脱硫除尘塔入口结构优化模拟

利用商用CFD软件Fluent，采用k-ε湍流模型和SIMPLE算法，对新型伞罩型湿式脱硫除尘塔内的三维两相流场进行数值模拟，发现了塔内烟气入口处流场所存在的不均匀性。为将其流场调节均匀从而提高脱硫除尘效率，在数值模拟的基础上提出在入口处加装直导流板、阶梯导流板和弯曲导流板，并分析塔内y=0截面速度的分布，以及z＝0.21 m截面上的颗粒浓度、速度和压力等参数的分布。结果表明：通过加装阶梯导流板和弯曲导流板均可以将流场调节均匀，达到较理想状态，从而实现高效净化气体的目的。模拟结果对设备的优化设计和实际运行有一定的指导作用。     

生物法同时脱硫脱硝试验研究

采用轻质陶粒生物滴滤塔处理摸拟燃煤烟气中二氧化硫和氮氧化物的试验研究，探讨生物法同时脱硫脱硝的影响因素及生物降解宏观动力学。研究结果表明，生物法能有效同时去除烟气中的二氧化硫和氮氧化物，烟气同时脱硫脱硝效率分别可达99.9%和88.9%。为获得最佳烟气同时脱硫脱硝效果，二氧化硫和氮氧化物进气负荷应分别＜140 g/（m³·h）和20 g/（m³·h），循环液pH=7～8，空床停留时间为30.28 s，喷淋密度为8.81 L/（m³·h）。     

表面活性剂加强动电技术去除污泥中铜和镉

以实际城市污泥为研究对象,通过采用表面活性剂作为阴极液,并考虑阴极液pH值、表面活性剂类型和电压3种因素对动电技术去除污泥中重金属(铜和镉)的影响,选用正交试验确定最佳试验条件.结果表明,采用表明活性剂作为阴极液加强动电技术去除污泥中重金属足可行的,铜和镉的去除率分别达到11.1%～52.6%和9.1%～46.7%.通过对正交试验结果进行极差和方差分析,试验的最佳条件为:电压为20 V,阴极液加入十六烷基三甲基氯化铵并控制pH值为4～6.表面活性剂的类型对动电技术去除镉具有显著影响.其中,表面活性剂类型对动电过程的影响最大,阴极液pH值次之,电压影响最小.     

Atmospheric deposition of phthalate esters in a subtropical city

In Chinese cities, air pollution has become a serious and aggravating environmental problem undermining the sustainability of urban ecosystems and the quality of urban life. Bulk atmospheric deposition samples were collected two-weekly, from February 2007 to January 2008, at three representative areas, one suburban and two urbanized, in the subtropical city, Guangzhou, China, to assess the deposition fluxes and seasonal variations of phthalate esters (PAEs). Sixteen PAE congeners in bulk deposition samples were measured and the depositional fluxes of ∑₁₆PAEs ranged from 3.41 to 190 μg m^?2 day^?1, and were highly affected by local anthropogenic activities. The significant relationship between PAEs and particulate depositional fluxes (correlation coefficient R² = 0.72, P < 0.001) showed PAEs are associated primarily with particles. Temporal flux variations of PAEs were influenced by seasonal changes in meteorological parameters, and the deposition fluxes of PAEs were obviously higher in wet season than in dry season. Diisobutyl phthalate (DiBP), Di-n-butyl phthalate (DnBP), and Di(2-ethylhexyl) phthalate (DEHP) dominated the PAE pattern in bulk depositions, which is consistent with a high consumption of the plasticizer market in China. PAE profiles in bulk deposition showed similarities exhibited in both time and space, and a weak increase of high molecular weight PAE (HMW PAE) contribution in the wet season compared to those in the dry season. Average atmospheric deposition fluxes of PAEs in the present study were significantly higher than those from other studies, reflecting strong anthropogenic inputs as a consequence of rapid industrial and urban development in the region.     

Occurrence and distribution of polycyclic aromatic carbons in sludges from wastewater treatment plants in Guangdong, China

In this study, the occurrence and distribution of polycyclic aromatic hydrocarbons (PAHs) were investigated in six sludge samples collected from Guangdong Province, China. Concentrations of PAHs varying from 2,534.1 to 6,926.6 μg kg^???1 (dry sludge) were observed in three municipal wastewater treatment plants with phenanthrene (Phe), fluoranthene, and pyrene being the main compounds. In addition, 682.6 μg kg^???1 PAHs were detected in one sludge sample from a food processing plant, with fluorene, Phe, and chrysene being the main components. No PAHs were detected in sludge samples obtained from two cosmetic plants. The levels and distributional characteristics of PAHs, polychlorinated biphenyls (PCBs), and polycyclic musks (PMs) from the samples were also compared. The results of this comparison indicated that petrochemical refineries and road traffic played important roles in the PAH loads in sludge, while PMs primarily originated from domestic wastewater and industrial wastewater from cosmetic plants. Finally, the presence of 98.8 μg kg^???1 PCBs in sludge suggested diffusional emission sources from electrical components containing PCBs.